Flex-Grip 550 is an all purpose, ber-free, duct sealant for use on all types of metal duct, berglass duct board, ex duct, and duct fabric. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays exible and will not crack. Flex-Grip's excellent coverage rates and brush-on application reduce the amount of sealant used and lower the labor cost of the installation.
CARLISLE® Flex Grip, Hardcast Water Based Duct Sealant, Series: 550, 1 gal, Pail, Composition: 0.1 - 1% De-Foaming Agent, 0.1 - 1% Nonylphenol Polyethylene Glycol Ether, 0.1 - 1% Polymer, Ethyl Acrylate and Methacrylic Acid, 0.1 - 1% Acrylic Polymer, 0.1 - 1% Ethanolamine, 0.1 - 1% Polycarboxylate Salt, 0.1 - 1% Ethylene Glycol, 1 - 5% Fuller's Earth, 0.1 - 1% Silica, Crystalline, 15 - 40% Limestone, 1 - 5% Methanol, 0.1 - 1% 4,4-Dimethyloxazolidine, 0.1 - 1% 1,2-Propylene Glycol, Paste, Gray, Slight Ammonia, 48 hr Dry Time, Up to 320 Linear ft at 3 in W Coverage Area, 8.4 - 9.5 pH, 212 deg F Boiling, 49 g/L VOC, 300 KcP at 77 deg F Viscosity, 1.32 lb/cu-ft Density, Greater Than 1 Vapor Density, 17 mmHg at 20 deg C Vapor Pressure, 30 - 40% Volatile Evaporation Rate, 35 - 110 deg F Application
Series | : | 550 |
Net Content | : | 1 gal |
Composition | : | 0.1 - 1% De-Foaming Agent, 0.1 - 1% Nonylphenol Polyethylene Glycol Ether, 0.1 - 1% Polymer, Ethyl Acrylate and Methacrylic Acid, 0.1 - 1% Acrylic Polymer, 0.1 - 1% Ethanolamine, 0.1 - 1% Polycarboxylate Salt, 0.1 - 1% Ethylene Glycol, 1 - 5% Fuller's Earth, 0.1 - 1% Silica, Crystalline, 15 - 40% Limestone, 1 - 5% Methanol, 0.1 - 1% 4,4-Dimethyloxazolidine, 0.1 - 1% 1,2-Propylene Glycol |
Form | : | Paste |
Color | : | Gray |
Odor/Scent | : | Slight Ammonia |
Dry Time | : | 48 hr |
pH Range | : | 8.4 - 9.5 |
Boiling Point | : | 212 deg F |
VOC Content | : | 49 g/L |
Viscosity | : | 300 KcP at 77 deg F |
Density | : | 1.32 lb/cu-ft |
Vapor Density | : | Greater Than 1 |
Vapor Pressure | : | 17 mmHg at 20 deg C |
Evaporation Rate | : | 30 - 40% Volatile |