piwik image

Bard® C60H1-A05SP4XXE

Bard® C60H1-A C60H1-A05SP4XXE Flex Package Heat Pump, 5 ton Nominal, 51000 B

Bard® C60H1-A05SP4XXE

Bard® Quiet Climate Flex Package Heat Pump, Series: C, C60H1-A Model, 5 ton Nominal, 55500 Btu/hr Cooling Cooling BTU Rating, 51000 Btu/hr Heating Heating BTU Rating, 230/208 VAC, 71 A, 1/2 hp Fan Motor, 3/4 hp Blower Motor, 60 Hz, 1 -Phase, 1025 rev/min Fan Motor, Scroll Compressor, 3700 cu-ft/min Fan Motor, 1650 cu-ft/min Cooling Blower Motor, 10.6 EER, R-410A Refrigerant, 2 -Stage, 80 A Fuse, Wall Mounting, 20 x 30 x 1 in Filter, 20 ga Stainless Steel, Galvanized, Zinc-Coated, Buckeye Gray, 42.075 in W x 93 in H x 22.432 in D

Series      :      C
Model      :      C60H1-A
Cooling BTU Rating      :      55500 Btu/hr Cooling
Heating BTU Rating      :      51000 Btu/hr Heating
Nominal Capacity      :      5 ton
Voltage Rating      :      230/208 VAC
Amperage Rating      :      71 A
Refrigerant Type      :      R-410A
Mounting Type      :      Wall
HP Rating      :      1/2 hp Fan Motor, 3/4 hp Blower Motor
Rotational Speed      :      1025 rev/min Fan Motor
Frequency Rating      :      60 Hz
Phase      :      1
Compressor Type      :      Scroll
CFM Rating      :      3700 cu-ft/min Fan Motor, 1650 cu-ft/min Cooling Blower Motor
EER Rating      :      10.6
Number of Stages      :      2
Fuse Rating      :      80 A
Material      :      20 ga Stainless Steel
Finish      :      Galvanized, Zinc-Coated
Color      :      Buckeye Gray
Dimensions      :      42.075 in W x 93 in H x 22.432 in D
  • Revision code (1)
  • Economizer (internal) ventilator - fully modulating with exhaust mn (ECONCHS-E5 field installed part no)
  • 2 in pleated (MERV 8) filter
  • Front (standard) supply air outlet
  • Standard hydrophilic fin indoor coil and uncoated aluminum outdoor coil
  • Control modules: the high and low pressure controls are auto reset, the low ambient control includes an 8201-008 (fan relay) and permits cooling operation down to 0 deg F
  • 21.4/23.3 A-rated load, 27.2 A branch circuit selection current, 153/153 A locked rotor compressor, 4.1 A fan motor and 4.7 A blower motor
  • One-speed fan and variable speed blower motor
  • Self-contained energy efficient heating and cooling system
  • Copper tube/aluminum fin coils - grooved copper tubing and enhanced aluminum fins provide maximum heat transfer and high energy efficiency
  • Twin blowers - move air quietly
  • Phase rotation monitor - standard on all three-phase scroll compressors
  • Foil faced insulation - standard on all units
  • Full length mounting brackets
  • Electrical components - are easily accessible for routine inspection and maintenance through a right side, service panel opening
  • Electric heat strips - features an automatic limit and thermal cut-off safety control
  • Filter service door - separate service door provides easy access for filter change
  • Condenser fan and motor shroud assembly slide out for easy access
  • Slope top - standard feature for water run-off
  • Top rain flashing - standard feature on all models