Tekmar Control Systems 665

Tekmar Control Systems 665 PVC/Plastic Snow Detector and Melting Control - Pulse

Tekmar Control Systems 665

The snow detector and melting control 665 is a microprocessor-based control which operates a single zone snow melting system. The control can operate automatically when a snow / ice sensor 090 is installed or the user can manually enable and/or disable the system. When the control is in the melting mode, the slab is maintained at a "melting" temperature through an on/off output which operates a contactor for electrical cables, a boiler, an injection pump or an injection valve. When the control is not in the melting mode, the melt system can either be shut down or it can be maintained at an idle temperature for faster response and improved safety. The 665 control includes a large liquid crystal display (LCD) in order to view system status and operating information.

Brand Name      :      Tekmar Control Systems
Depth      :      2-13/16 Inch
Frequency Rating      :      50/60 Hz
Height      :      6-5/8 Inch
Humidity Rating      :      Less Than 90% RH Non-Condensing
Item Name      :      Snow Detector and Melting Control - Pulse with Modulation
Material      :      PVC/Plastic
Temperature Rating      :      32 - 104 deg F
VA Rating      :      600 VA
Voltage Rating      :      115 VAC
Width      :      7-9/16 Inch
  • Slab outdoor reset
  • Automatic snow detection and melt control (with 090 sensor)
  • Temporary idle
  • Manual override
  • Warm weather shut down
  • Cold weather cut out
  • Remote display and adjustment capabilities
  • Test sequence to ensure proper component operation
  • Equipment exercising
  • 230 VAC, 5 amp, 1/3 hp, pilot duty 240 VA relay
  • 20 to 260 VAC, 2 VA demand
  • NTC thermistor, 10 kilo-ohm at 77 deg F
  • pdf Brochure/Catalog https://cdn-assets.unilogcorp.com/ASSETS-H/DOCUMENTS/ITEMS/EN/Uni_Geary14169_Broc.pdf