piwik image

Design Polymerics DP25021B

Design Polymerics DP25021B Water Based Duct Liner Adhesive, 1 gal Pail, Up to 40

Design Polymerics DP25021B

A premium grade, water based, UL classified duct liner adhesive specifically formulated for spray, brush, roller and coil line applications. It can be used to seal cut edges of fiberglass duct liner. DP 2502 can also be used to bond duct wrap to galvanized duct and for bonding FSK to fiberglass and urethane pipe insulation.

Brand Name      :      Design Polymerics
Item Name      :      Duct Liner Adhesive
Type      :      Water Based
Container Size      :      1 gal
Container Type      :      Pail
Form      :      Liquid
Color      :      Black
Odor/Scent      :      Mild Sweet
Coverage Area      :      Up to 400 sq-feet/gal
pH Rating      :      8 - 9.5
Specific Gravity      :      1.1 - 1.2
Boiling Point      :      212 deg F
VOC      :      22 g/l
Viscosity      :      2500 - 3500 cPs
  • Excellent wet tack
  • Non-flammable
  • Moisture resistant
  • Exceptional coverage
  • Low odor
  • Non-oxidizing
  • Bonding fibrous duct wrap and duct liner insulation to galvanized duct work
  • Sealing cut edges of fiberglass insulation
  • Bonding kraft backed foil coverings to fiberglass and urethane flat stock or pipe insulation
  • Bonding multiple layers of fibrous insulation board
  • Clean Up - use warm water and soap
  • Open time - 10 - 20 min depending on humidity, temperature, and application rate
  • Flash point - no flash to boiling
  • Non-flammable wet or dry
  • Freeze/thaw stability - do not allow to freeze
  • Chemical family - synthetic latex
  • Solids content - 40 plus/minus 2%
  • pdf MSDS https://cdn-assets.unilogcorp.com/ASSETS-H/DOCUMENTS/ITEMS/EN/Uni_Geary01249_MSDS.pdf
  • pdf Specification Sheet https://cdn-assets.unilogcorp.com/ASSETS-H/DOCUMENTS/ITEMS/EN/Uni_Geary01249_Spec.pdf