piwik image

Delta SIG80-110MH

Delta Breez Signature SIG80-110MH Ventilation Fan With Motion and Humidity Senso

Delta SIG80-110MH

Low noise ceiling mount ventilating fan rated for continuous running. Energy Star most efficient 2018. HVI, UL and cUL certified to comply with ASHRAE 62.2 local and whole building continuous and intermittent operation. Meets CA title 24 requirements.

Delta Ventilation Fan, Series: Breez Signature, 120 VAC, 0.38 A, 60 Hz, 6.2 W at 80 cfm, 8.2 W at 110 cfm, Steel, Galvanized, Ceiling Mount, 9-5/8 in Length, 9-5/8 in Width, 7-7/8 in Height, 12-3/8 in L x 12-3/8 in W Grille, 80 cfm at 0.1 in SP, 110 cfm at 0.1 in SP, 6 in Duct, 1

Power Rating      :      6.2 W at 80 cfm, 8.2 W at 110 cfm
Length      :      9-5/8 in
Width      :      9-5/8 in
Height      :      7-7/8 in
CFM Rating      :      80 cfm at 0.1 in SP, 110 cfm at 0.1 in SP
  • Brushless DC motor engineered to run continuously
  • Motor equipped with thermal cut-off fuse
  • Removable with permanently lubricated plug-in motor
  • Built-in soft start function to increase bearings life
  • Automatically powers off when impeller is locked abnormally
  • Self-compensating motor speed for intended airflow when static pressure is encountered
  • Galvanized steel body
  • Detachable 6 in Dia metal duct adapter
  • Built-in backdraft damper
  • Easy installation with expandable extension bracket
  • Includes 6 - 4 in duct reducer
  • Attractive design using ABS material grille
  • Attaches directly to housing with torsion springs
  • Blue and amber LED indicator lights to show humidity sensor and full speed modes
  • Full speed adjustable, 80 or 110 cu-ft/min
  • When motion is detected, fan runs at full speed, when user leaves, fan remains running at full speed until delay time (20 min) has passed, then fan runs humidity control mode
  • For humidity control mode, when humidity is above the user adjustable set point, fan runs at full speed, when humidity is below the set-point, the fan runs continuously at a pre-set lower level (0, 30, 50, 60 or 80 cu-ft/min)
  • Adjustable humidity set points between approximately 50 - 90% RH