- Call Us 800-44-geary
-
Locations
My Favorites
Duro Dyne® 8085
The Rapit® is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy-gauge, galvanized steel and installs in seconds. The Rapit® will penetrate and secure to round or rectangular damper blades up to 24 ga steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position. It's as easy-to-use as 1-2-3.
Duro Dyne® Damper Regulator Set, Model: RS256
| Model | : | RS256 |
- Slip the bearing over the edge of the damper at the bearing line
- Lay the assembly on any firm surface and rap the prong with a hammer
- One blow drives the prong through the damper blade, holding it securely to the damper
- When hit with a hammer, the prong will automatically form up tight by the ANVIL®, which is built into the bottom of the "Rapit®" bearing
Catalog
