piwik image

EWC® 14 EBD

EWC® Ultra-Zone 14 EBD Electronic Damper, 14 in, 24 ga Steel, Galvanized, Ro

EWC® 14 EBD

The EBD (electronic bypass) style are self-contained units that give you the static control mounted to the damper. It is an "all-in-one" design that makes the installation process much easier than most electronic bypass dampers. The static pressure can be adjusted in the field between 0.5 to 4 in of pressure. This is done by the turn of a set-screw.

EWC® Ultra-Zone Electronic Damper, EBD Model, 14 in Size, 24 VAC, 50/60 Hz, 24 ga Steel, Galvanized, Round, Terminal Block Connection, Domestic

Model      :      EBD
Size      :      14 in
Voltage Rating      :      24 VAC
Frequency Rating      :      50/60 Hz
Material      :      24 ga Steel
Finish      :      Galvanized
Shape      :      Round
Connection Type      :      Terminal Block
Domestic/Import      :      Domestic
  • Round bypass dampers are fabricated from 24 ga galvanized steel
  • The rolled shells are furnished with one straight (female) end and one crimped (male) end with stiffening beads for rigidity
  • Round EBD bypass dampers are equipped with low leakage blade seals
  • Reevecote diaphragm sensing element
  • 24 VAC at 3 V-A 1.5 W required to pressure switch
  • Pressure switch is factory wired to damper motor
  • SPDT HD contacts rated for 10 A at 120 VAC
  • (2) 1/4 in OD brass barbed air pressure connectors, (2) pitot tubes, (2) pressure tubing