piwik image

Geary Pacific Supply

MENU

Shop

    What We Do

    Resources

    Events

      Company

      Locations

        My Account

        Geary Pacific Supply

        Noritz® GHQ-C3201WX-FF US NG
        Send Print
        1. pin-int
        Noritz® GHQ-C3201WX-FF US NG

        Noritz® NRCB199DV GHQ-C3201WX-FF US NG Condensing Gas Combination Boiler, 95

        Noritz® GHQ-C3201WX-FF US NG

        Noritz® Condensing Gas Combination Boiler, Model: NRCB199DV, 120 VAC, 210 W Power, 60 Hz Frequency, 95 % AFUE, 18000 to 199900 Btu/hr BTU, 2 gal Capacity, 11.1 gpm Flow Rate, 15 to 150 psi Pressure, 3/4 in NPT Water Inlet, Hot Water Outlet and Gas Inlet, 1/2 in NPT Condensate Drain, 1/2 in NPT Auto Feeder Inlet, 1 in Heating Supply and Heating Return Connection, Natural Gas Fuel, 2-Pipe Direct Vent, Direct Electronic Ignition, Noise Rating: <60 dB, Wall Hung Mounting, Steel, Polyester-Coated, Black, 90 to 140 deg F Domestic Hot Water, 80 to 180 deg F Heating, Dimensions: 27 in H x 18.5 in W x 12.8 in D

        Model      :      NRCB199DV
        Voltage Rating      :      120 VAC
        Power Rating      :      210 W
        Frequency Rating      :      60 Hz
        AFUE Rating      :      95 %
        BTU Rating      :      18000 to 199900 Btu/hr
        Capacity      :      2 gal
        Flow Rate      :      11.1 gpm
        Pressure Rating      :      15 to 150 psi
        Connection Type      :      3/4 in NPT Water Inlet, Hot Water Outlet and Gas Inlet, 1/2 in NPT Condensate Drain, 1/2 in NPT Auto Feeder Inlet, 1 in Heating Supply and Heating Return
        Fuel Type      :      Natural Gas
        Vent Type      :      2-Pipe Direct
        Ignition Type      :      Direct Electronic
        Noise Rating      :      <60 dB
        Mounting Type      :      Wall Hung
        Material      :      Steel
        Finish      :      Polyester-Coated
        Color      :      Black
        Temperature Rating      :      90 to 140 deg F Domestic Hot Water, 80 to 180 deg F Heating
        Dimensions      :      27 in H x 18.5 in W x 12.8 in D
        • Compact design- ANSI Z21.13/CSA 4.9 certified design that can be wall-mounted indoors
        • Durable steel casing with polyester coating
        • Heat exchanger - manufactured with 316L stainless steel
        • Venting options - for indoor installation only, convertible to single vent (-SV) with the use of conversion kit (#SV-CK-2)
        • Direct electronic ignition
        • PVC or CPVC or polypropylene exhaust vent material requirements
        • 2 or 3 in exhaust vent diameter requirements
        • Temperature controls - includes remote thermostat that can precisely adjust the output temperature with the capability to display temperatures in deg C, domestic mode: 90 - 140 deg F, heating mode: 80 - 180 deg F
        • Outdoor reset control - built-in customizable programming for energy savings and comfort with outdoor temperature sensor (included)
        • Power cord installation kit - 6 ft power cord is included
        • Safety devices - flame rod, high limit switch, lightning protection device (ZNR), freezing prevention device, fan rotation detector
        • Internal pump - heating mode: used for primary closed loop, domestic mode: used for pre-heating of internal plate heat exchanger
        • 0.4 gal/min minimum activation flow rate
        • 3.5 - 10-1/2 in WC gas supply pressure range
        • 3/4 in upto 30 ft minimum gas line size
        • Vent termination clearances to any building opening: below - 1 ft, side - 1 ft, or above - 1 ft
        • Case clearances: top - 12 in , front - 4 in, sides - 2 in, back - 5/8 in, below - 12 in
        • Includes anchoring screws, wall-mounting bracket, emergency kit, owner's guide, warranty, installation manual, quick installation manual, outdoor temperature sensor
        • PP flue collar
        • 10 years limited heat exchanger warranty for residential use