piwik image

Geary Pacific Supply

MENU

Shop

    What We Do

    Resources

    Events

      Company

      Locations

        My Account

        Geary Pacific Supply

        PHOENIX TD6801C
        Send Print
        1. pin-int
        PHOENIX TD6801C

        PHOENIX Aerocool® Trophy Series TD6801C Evaporative Cooler, 1600 to 2000 Btu

        PHOENIX TD6801C

        PHOENIX Aerocool® Evaporative Cooler, Series: Trophy Series, 120 to 240 V, 13.3 A, 1 hp HP Rating, 60 Hz, 1 ph, 1600 to 2000 Btu/hr, 6800 cfm CFM Rating, Sheet Steel, Galvanized/Zinc-Plated, 34-5/16 in H x 42 in W x 45 in D

        Series      :      Trophy Series
        BTU Rating      :      1600 to 2000 Btu/hr
        CFM Rating      :      6800 cfm
        Voltage Rating      :      120 to 240 V
        Amperage Rating      :      13.3 A
        HP Rating      :      1 hp
        Frequency Rating      :      60 Hz
        Phase      :      1 ph
        Material      :      Sheet Steel
        Finish      :      Galvanized/Zinc-Plated
        Dimensions      :      34-5/16 in H x 42 in W x 45 in D
        • High quality architectural-grade Peblar XT finish
        • Pro-Armor- the premier single inlet cooler with polymeric inner structure that completely shields the wet section from corrosive interaction
        • These units are available with both 8 or 12 in high efficiency rigid media pads
        • Bearings have an L10 bearing life of 39000 hr
        • Electrical service knockouts are 1/2 in
        • Water supply line is 1/4 in OD on both sides
        • Bottom pan drain is 3/4 in male hose thread
        • All models ship with 120 V pumps included low sump pump, 240 V pumps are available
        • 8 in media
        • Bearing life - L10 bearing life of 39600 hr is based on ABMA standard 9/ISO standard 281
        • Blower wheel - balanced in accordance with ISO 1940 and ANSI standard S2.19, quality grade G6.3
        • 1 phase motors - tested under UL standard 507 for locked rotor and heat rise protection
        • Evaporative media - specially corrugated cellulose material, impregnated with insoluble anti-riot salts and rigidifying saturates
        • Sealant - water immersion per ASTM D870
        • Flexibility - per ASTM D522
        • Corrosion-resistance - per ASTM B117
        • Pencil hardness - per ASTM D3363
        • Impact-resistance - per D2794
        • Surface burning characteristics - of building materials (best rating) per UL 723 and ASTM E-84
        • PEBLAR XT - is our one coat TGIC polyester powder-coating system that is applied over five-stage zinc phosphate prepared sheet steel surfaces for protection against atmospheric corrosion