Aspen Evaporator Coil with Plenum and Auxiliary Drain Pan, Series: CR (DX-Treme), CR48A Model, 48000 Btu/hr BTU, Configuration: Horizontal, 4 ton, R-410 Refrigerant, Cased Coil, 3/8 in ODS Liquid, 7/8 in ODS Suction, 3/4 in FPT Drain Connection, 0.08 in Piston Size, Copper Tube and Steel Cabinet, Galvanized, Cabinet - 17-1/2 in W x 23-1/2 in H x 40 in D
Refrigerant Type
|
:
|
R-410
|
Dimensions
|
:
|
Cabinet - 17-1/2 in W x 23-1/2 in H x 40 in D
|
- Rifled copper tubing, enhanced aluminium fins
- Immersion tested at 500 lb/sq-in, then nitrogen-pressurized and sealed
- Externally mounted flowrater body or internally mounted factory-installed TXV
- Schrader valve on liquid line for hiss-testing
- Refrigerant lines exit from the top of the coil
- Split access doors on top of the coil for easy service
- Plastic drain pans (primary and secondary)
- Built-in auxiliary drain pan with 3/4 in FPT
- Plenum sides and end constructed of foil-backed faced fiberglass duct board, plenum top and bottom constructed of galvanized steel
- Patented design
- 2nd generation
- Coil descriptor code (face area, rows, fins/in)
- Non-bleed air conditioner or heat pump R-410 TXV metering device
- 17-1/2 in W furnace
- Refrigerant out the top, plumbing out opposite sides
-
Catalog
https://assets.unilogcorp.com/267/ITEM/DOC/Aspen_CC60D44_210R_057_Catalog.pdf
-
Instruction/Installation Manual
https://assets.unilogcorp.com/267/ITEM/DOC/Aspen_CR60A34_210T_000_Manual.pdf
-
Specification Sheet
https://assets.unilogcorp.com/267/ITEM/DOC/Aspen_CR60A34_210T_000_Specification_Sheet.pdf