- Call Us 800-44-geary
-
Locations
My Favorites
Copeland™ ZP36K5EPFV830
Copeland™ Scroll Compressor, Series: ZP, 36000 Btu/hr BTU, 3 ton, 7/8 in Stub Suction Line, 1/2 in Stub Discharge Line, 530 - 600 lb/hr, 4.25 cu-ft/min, 208 - 230 VAC, 16.4 A, 3540 W, 2-3/4 hp, R-410A, HFC Refrigerant, 3500 rev/min Speed, 68 - 73 dBA, 10.2 - 21.1 EER, POE-AK/DA, 3MA/SP32 Compressor Oil, 45-50 deg F Evaporator, 100-130 deg F Condensing, 65-70 deg F Return Gas, 85-115 deg F Liquid, 9.56 in L x 9.56 in W x 19.94 in H
| Series | : | ZP |
| BTU Rating | : | 36000 Btu/hr |
| Tonnage | : | 3 ton |
| Amperage Rating | : | 16.4 A |
| Voltage Rating | : | 208 to 230 VAC |
| Compressor Oil | : | POE-AK/DA, 3MA/SP32 |
| Refrigerant Type | : | R-410A, HFC |
| Discharge Line Size | : | 1/2 in Stub |
| Flow Rate | : | 530 to 600 lb/hr |
| CFM Rating | : | 4.25 cfm |
| Suction Line Size | : | 7/8 in Stub |
| Power Rating | : | 3540 W, 2-3/4 hp |
| Speed Rating | : | 3500 rpm |
| Sound Level | : | 68 to 73 dBA |
| EER Rating | : | 10.2 to 21.1 |
| Temperature Rating | : | 45 to 50 deg F Evaporator, 100 to 130 deg F Condensing, 65 to 70 deg F Return Gas, 85 to 115 deg F Liquid |
| Dimensions | : | 9.56 in L x 9.56 in W x 19.94 in H |
- Capacitor run-permanent split capacitor motor type
- Internal inherent protection-one-protector (line break) Use with contactor
- Compressor family Series
- Model variation
- 70% fewer moving parts
- Ability to start under any system load, without start components
- Compact, lightweight design
- No complex internal suction and discharge valves for quieter operation and higher reliability
- Axial and radial compliance allow the scroll members to separate in the presence of liquid refrigerant, thus providing protection against liquid damage
- Operate at lower sound and vibration levels than traditional compressors
- Easy to service and maintain due to their compact size and lightweight, simple design
- Engineered for optimum performance with today's chlorine-free refrigerants
- Low noise and vibration levels
- Centrifugal oil pump
- 42 oz initial oil charge, 38 oz oil recharge
- 7.5 in L x 7.5 in W x 17.17 in H mounting
- 20 A-rated load, 112 A locked rotor, 28 A minimum circuit, 22 A maximum operating
- 2.1 cu-in/rev displacement
Catalog
