Phoenix FS650A

Phoenix FS650A Hot-Dipped Galvanized Zinc-Coated G40/G90 Sheet Steel 2-Speed Sid

Phoenix FS650A
Area      :      13000 cu-feet
Brand Name      :      Phoenix
CFM Rating      :      6500/4330 cfm
Dimension      :      37 Inch Width x 42-1/4 Inch Height x 37 Inch Depth
Finish      :      Hot-Dipped Galvanized, Zinc-Coated
Frequency Rating      :      60 Hz
HP Rating      :      3/4 hp
Item Name      :      Evaporative Cooler
Material      :      G40/G90 Sheet Steel
Phase      :      1 PH
Type      :      2-Speed, Side Draft Aspen Residential
Voltage Rating      :      120 - 240 VAC
  • High quality architectural grade Peblar XT finish
  • Bearings have an L10 bearing life of 39000 hr
  • Electrical service knockouts are 1/2 Inch
  • Water supply line is 1/4 Inch outside diameter on both sides
  • Bottom pan drain is 3/4 Inch male hose thread
  • Includes low sump
  • Bearing life - L10 bearing life of 39600 hr is based on ABMA standard 9/ISO standard 281
  • Blower wheel - balanced in accordance with ISO 1940 and ANSI standard S2.19, quality grade G6.3
  • 1 PH motors - tested under UL standard 507 for locked rotor and heat rise protection
  • Sealant - water immersion per ASTM D870
  • Flexibility - per ASTM D756
  • Corrosion resistance - per ASTM B117
  • Pencil hardness - per ASTM D3363
  • Impact resistance - per D2794
  • Surface burning characteristics - of building materials (best rating) per UL 723 and ASTM E-84
  • PEBLAR XT - is our one coat TGIC polyester powder coating system that is applied over 5-stage zinc phosphate prepared sheet steel surfaces for protection against atmospheric corrosion
  • pdf Specification Sheet https://cdn-assets.unilogcorp.com/ASSETS-H/DOCUMENTS/ITEMS/EN/Uni_Geary14295_Spec.pdf