- Call Us 800-44-geary
-
Locations
My Favorites
Noritz GHQ-C2801WX-FF US NG
| AFUE | : | 95% |
| Amperage Rating | : | 1.75 amp Draw |
| BTU Rating | : | 18000 - 180000 BTU/hr |
| Brand Name | : | Noritz |
| Capacity | : | 2 gal |
| Color | : | Black |
| Connection Type | : | 3/4 Inch NPT Water Inlet, Hot Water Outlet and Gas Inlet, 1/2 Inch NPT Condensate Drain, 1/2 Inch NPT Auto Feeder Inlet, 3/4 Inch NPT Water Inlet, Hot Water Outlet and Gas Inlet, 1/2 Inch NPT Condensate Drain, 1/2 Inch NPT Auto Feeder Inlet, 1 Inch Heating Supply and Heating Return |
| Dimension | : | 18.5 Inch Width x 27 Inch Height x 12.8 Inch Depth |
| Finish | : | Polyester Coating |
| Flow Rate | : | 9.8 gpm |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| Ignition Type | : | Direct Electronic |
| Item Name | : | Condensing Gas Combination Boiler |
| Material | : | Steel |
| Model | : | NRCB180DV |
| Mounting Type | : | Wall Hung |
| Noise Rating | : | Less Than 60 dB |
| Pressure Rating | : | 15 - 150 psi |
| Temperature Rating | : | 90 - 140 deg F Domestic Hot Water, 80 - 180 deg F Heating |
| Type | : | Residential, Indoor |
| Vent Type | : | 2-Pipe Direct |
| Voltage Rating | : | 120 VAC |
| Wattage | : | 210 watt |
- Compact design- ANSI Z21.13/CSA 4.9 certified design that can be wall-mounted indoors
- Durable steel casing with polyester coating
- Heat exchanger - manufactured with 316L stainless steel
- Venting options - for indoor installation only, convertible to single vent (-SV) with the use of conversion kit (#SV-CK-2)
- Direct electronic ignition
- PVC or CPVC or polypropylene exhaust vent material requirements
- 2 or 3 Inch exhaust vent diameter requirements
- Temperature controls - includes remote thermostat that can precisely adjust the output temperature with the capability to display temperatures in degree C, domestic mode: 90 - 140 deg F, heating mode: 80 - 180 deg F
- Outdoor reset control - built-in customizable programming for energy savings and comfort with outdoor temperature sensor (included)
- Power cord installation kit - 6 feet power cord is included
- Safety devices - flame rod, high limit switch, lightning protection device (ZNR), freezing prevention device, fan rotation detector
- Internal pump - heating mode: used for primary closed loop, domestic mode: used for pre-heating of internal plate heat exchanger
- 0.4 gpm minimum activation flow rate
- 3.5 - 10.5 Inch WC gas supply pressure range
- 3/4 Inch up to 30 feet minimum gas line size
- Vent termination clearances to any building opening: below - 1 feet, side - 1 feet, or above - 1 feet
- Case clearances: top - 12 Inch , front - 4 Inch, sides - 2 Inch, back - 5/8 Inch, below - 12 Inch
- Includes anchoring screws, wall mounting bracket, emergency kit, owner’s guide, warranty, installation manual, quick installation manual, outdoor temperature sensor
- PP flue collar
- 10 years limited heat exchanger warranty for residential use
- 5 years limited parts warranty
- 1 year reasonable labor
Installation Sheet Name
