- Call Us 800-44-geary
-
Locations
My Favorites
Noritz® Condensing Gas Combination Boiler, Model: NRCB180DV, 120 VAC, 1.75 A Draw, 210 W Power, 60 Hz Frequency, 95 % AFUE, 18000 to 180000 Btu/hr BTU, 2 gal Capacity, 9.8 gpm Flow Rate, 15 to 150 psi Pressure, 3/4 in NPT Water Inlet, Hot Water Outlet and Gas Inlet, 1/2 in NPT Condensate Drain, 1/2 in NPT Auto Feeder Inlet, 3/4 in NPT Water Inlet, Hot Water Outlet and Gas Inlet, 1/2 in NPT Condensate Drain, 1/2 in NPT Auto Feeder Inlet, 1 in Heating Supply and Heating Return Connection, Natural Gas Fuel, 2-Pipe Direct Vent, Direct Electronic Ignition, Noise Rating: <60 dB, Wall Hung Mounting, Steel, Polyester-Coated, Black, 90 to 140 deg F Domestic Hot Water, 80 to 180 deg F Heating, Dimensions: 27 in H x 18.5 in W x 12.8 in D
| Model | : | NRCB180DV |
| Voltage Rating | : | 120 VAC |
| Amperage Rating | : | 1.75 A Draw |
| Power Rating | : | 210 W |
| Frequency Rating | : | 60 Hz |
| AFUE Rating | : | 95 % |
| BTU Rating | : | 18000 to 180000 Btu/hr |
| Capacity | : | 2 gal |
| Flow Rate | : | 9.8 gpm |
| Pressure Rating | : | 15 to 150 psi |
| Connection Type | : | 3/4 in NPT Water Inlet, Hot Water Outlet and Gas Inlet, 1/2 in NPT Condensate Drain, 1/2 in NPT Auto Feeder Inlet, 3/4 in NPT Water Inlet, Hot Water Outlet and Gas Inlet, 1/2 in NPT Condensate Drain, 1/2 in NPT Auto Feeder Inlet, 1 in Heating Supply and Heating Return |
| Fuel Type | : | Natural Gas |
| Vent Type | : | 2-Pipe Direct |
| Ignition Type | : | Direct Electronic |
| Noise Rating | : | <60 dB |
| Mounting Type | : | Wall Hung |
| Material | : | Steel |
| Finish | : | Polyester-Coated |
| Color | : | Black |
| Temperature Rating | : | 90 to 140 deg F Domestic Hot Water, 80 to 180 deg F Heating |
| Dimensions | : | 27 in H x 18.5 in W x 12.8 in D |
- Compact design- ANSI Z21.13/CSA 4.9 certified design that can be wall-mounted indoors
- Durable steel casing with polyester coating
- Heat exchanger - manufactured with 316L stainless steel
- Venting options - for indoor installation only, convertible to single vent (-SV) with the use of conversion kit (#SV-CK-2)
- Direct electronic ignition
- PVC or CPVC or polypropylene exhaust vent material requirements
- 2 or 3 in exhaust vent diameter requirements
- Temperature controls - includes remote thermostat that can precisely adjust the output temperature with the capability to display temperatures in deg C, domestic mode: 90 - 140 deg F, heating mode: 80 - 180 deg F
- Outdoor reset control - built-in customizable programming for energy savings and comfort with outdoor temperature sensor (included)
- Power cord installation kit - 6 ft power cord is included
- Safety devices - flame rod, high limit switch, lightning protection device (ZNR), freezing prevention device, fan rotation detector
- Internal pump - heating mode: used for primary closed loop, domestic mode: used for pre-heating of internal plate heat exchanger
- 0.4 gal/min minimum activation flow rate
- 3.5 - 10-1/2 in WC gas supply pressure range
- 3/4 in upto 30 ft minimum gas line size
- Vent termination clearances to any building opening: below - 1 ft, side - 1 ft, or above - 1 ft
- Case clearances: top - 12 in , front - 4 in, sides - 2 in, back - 5/8 in, below - 12 in
- Includes anchoring screws, wall-mounting bracket, emergency kit, owner's guide, warranty, installation manual, quick installation manual, outdoor temperature sensor
- PP flue collar
- 10 years limited heat exchanger warranty for residential use
Instruction/Installation Manual
