RectorSeal No. 5 pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 lb/sq-in (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Not recommended for use with ABS, CPVC pipe or oxygen, chlorine and other oxidizers.

RectorSeal® Number 5 Pipe Thread Sealant, 16 oz, Brush Top Can, Composition: 20 - 30% Diacetone Alcohol, Paste, Yellow, Mild, 1.38 Specific Gravity, 322 deg F Boiling, 150 deg F Flash Point, 0.3 mmHg at 68 deg F Vapor Pressure, 317 g/L VOC, 20 - 140 deg F Application, -50 to 400 deg F Performance

• For use with potable water (hot or cold)
• Lead free and contains no other metals
• Soft setting, slow drying
• Brushable
• Will not dry out in the can
• Multi-purpose - wide range of service uses
• For pressure upto 12000 lb/sq-in (liquids) and 2600 lb/sq-in (gases)
• Smooth easy application
• Permits easy break out with no damage to threads
• Economical - requires only a small amount
• Reduces friction to allow tighter joint makeup
• Lubricates and protects threads
• 2 year shelf life

• SDS https://assets.unilogcorp.com/267/ITEM/DOC/RectorSeal_25431_SDS.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/RectorSeal_25431_Specification_Sheet.pdf