PHOENIX Aerocool Evaporative Cooler, Series: TROPHY, 120 - 240 VAC, 11.2/6 A, 3/4 hp, 60 Hz, 1 -Phase, 1000 - 1400 Btu/hr BTU, 4800 cu-ft/min, G40/G90 Sheet Steel, Galvanized, Zinc-Coated, 27-5/16 in H x 42 in W x 43 in D
Dimensions
|
:
|
42 in W x 43 in D x 27-5/16 in H
|
- High quality architectural-grade Peblar XT finish
- Pro-Armor- the premier single inlet cooler with polymeric inner structure that completely shields the wet section from corrosive interaction
- These units are available with both 8 or 12 in high efficiency rigid media pads
- Bearings have an L10 bearing life of 39000 hr
- Electrical service knockouts are 1/2 in
- Water supply line is 1/4 in OD on both sides
- Bottom pan drain is 3/4 in male hose thread
- All models ship with 120 V pumps included low sump pump, 240 V pumps are available
- 8 in media
- Bearing life - L10 bearing life of 39600 hr is based on ABMA standard 9/ISO standard 281
- Blower wheel - balanced in accordance with ISO 1940 and ANSI standard S2.19, quality grade G6.3
- 1 phase motors - tested under UL standard 507 for locked rotor and heat rise protection
- Evaporative media - specially corrugated cellulose material, impregnated with insoluble anti-riot salts and rigidifying saturates
- Sealant - water immersion per ASTM D870
- Flexibility - per ASTM D522
- Corrosion-resistance - per ASTM B117
- Pencil hardness - per ASTM D3363
- Impact-resistance - per D2794
- Surface burning characteristics - of building materials (best rating) per UL 723 and ASTM E-84
- PEBLAR XT - is our one coat TGIC polyester powder-coating system that is applied over five-stage zinc phosphate prepared sheet steel surfaces for protection against atmospheric corrosion
-
Specification Sheet
https://assets.unilogcorp.com/267/ITEM/DOC/Phoenix_TD6812C_Specification_Sheet.pdf