piwik image

Purolator® 5251023609

Purolator® Key Pleat™ 5251023609 Air Filter, Pleated Filter, Synthetic

Purolator® 5251023609

York® Predator™ units are convertible single packages with a common footprint cabinet and common roof curb for all 7.5 through 12.5 ton models. All units have two compressors with independent refrigeration circuits to provide 2-stages of cooling. The units were designed for light commercial applications and can be easily installed on a roof curb, slab or frame. All Predator™ units are self-contained and assembled on rigid full perimeter base rails allowing for three-way forklift access and overhead rigging. Every unit is completely charged, wired, piped and tested at the factory to provide a quick and easy field installation. All units are convertible between side and down airflow. Independent economizer designs are used on side and down discharge applications, as well as all tonnage sizes. Predator™ units are available in the following configurations cooling only, cooling with electric heat and cooling with gas heat. Electric heaters are available as factory installed options or field installed accessories. All units provide constant supply air volume.

Purolator® Key Pleat™ Air Filter, Pleated Filter, Synthetic Media, Die-Cut Beverage Board Frame, 18 in Width, 20 in Height, 1 in Depth, 8 MERV, 4.3 sq-ft Media Area, 12 Pleats per Linear Feet, 300 fpm Rated Velocity, 0.27 in-WG Initial Resistance, 1 in-WG Final Resistance, 750 cfm Air Flow Capacity, 19-1/2 in H x 17-3/8 in W x 1 in D Actual, 150 deg F

Filter Type      :      Pleated
Media Material      :      Synthetic
Frame Material      :      Die-Cut Beverage Board
Media Area      :      4.3 sq-ft
Initial Resistance      :      0.27 in-WG
Final Resistance      :      1 in-WG
Air Flow Capacity      :      750 cfm
  • A seven strap die-cut is located on the air leaving side of the Key Pleat™ MERV 8 providing additional strength and durability to each filter
  • In combination, the boxed pleat tips provide more surface area and points of contact for the die-cut to be securely glued to the media pack
  • The inside of the die-cut frame is completely-coated with adhesive to ensure a solid bond at all points of contact with the media pack
  • The pack is sealed inside the frame and pleat tips are bonded to the stabilizers and diagonal support members
  • The sealant used to bond the frame to the media pack is highly water repellent
  • That means that the filters maintain structural integrity even when wet, no delaminating, excessive buckling or collapsing
  • The uniformity of pleat height and spacing ensures optimal performance throughout the useful life of every Key Pleat™ MERV 8 filter
  • The combination of the self-supporting media and the innovative, automated construction also means low resistance to airflow and cost-effective, environmentally responsible use of energy resources
  • Pleats will not bunch or collapse which can cause an increase in pressure drop and potential failure of the filter
  • Automated process delivers consistency and durability
  • Durable, self-supporting synthetic media
  • No metal, fully incinerable
  • Die-cut frame with interlocking corners for added strength
  • pdf Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Purolator_5251021132_Catalog.pdf
  • pdf Full Engineering Drawing https://assets.unilogcorp.com/267/ITEM/DOC/Purolator_5251072153_Full_Engineering_Drawing.pdf