- Call Us 800-44-geary
-
Locations
My Favorites
Heat-Flo HF-115
Heat-flo offers quality indirect water heating systems that provide abundant hot water, low operating cost and long life. Hot water from any heating boiler is circulated through the coil inside to heat all the water in the tank. Simply add another zone to your existing heating boiler.
Heat-flo Indirect Water Heater, 115 gal Capacity, 165750 Btu/hr, 14 gpm Flow Rate, 409 gph First Hour Delivery, NPT Connection, 150 psi, 9.1 sq-ft Coil Heating Surface, Continuous Draw: 306 gph, 6 ft-WC Pressure Drop, Stainless Steel, 200 deg F, 28 in Dia x 74 in H
| Capacity | : | 115 gal |
| BTU Rating | : | 165750 Btu/hr |
| Flow Rate | : | 14 gpm |
| First Hour Delivery | : | 409 gph |
| Connection Type | : | NPT |
| Pressure Rating | : | 150 psi |
| Coil Heating Surface | : | 9.1 sq-ft |
| Continuous Draw | : | 306 gph |
| Pressure Drop | : | 6 ft-WC |
| Material | : | Stainless Steel |
| Temperature Rating | : | 200 deg F |
| Dimensions | : | 28 in Dia x 74 in H |
- Large, smooth wall coils deliver full output for years
- No finned tubing to collect lime and sediment
- Includes over 2 in of insulation and a flexible thermoplastic jacket that will not dent or corrode and less than 10/hr heat loss
- All connections are on top on the standard units for a neat, clean installation
- Brass drain and relief valves are factory installed
- Standard Honeywell control and well for reliability and easy service
- Low operating cost
Specification Sheet
