Aspen Evaporator Coil with Plenum and Auxiliary Drain Pan, Series: CR (DX-Treme), CR36A Model, 36000 Btu/hr BTU, Configuration: Upflow/Downflow/Horizontal, 2 - 3 ton, Cased Coil, 7/8 in ODS Suction, 3/8 in ODS Liquid, 3/4 in FPT Drain Connection, Copper Tube and Steel Cabinet, Galvanized, 20-1/2 in W x 15-1/2 in H x 31 in D

• Rifled copper tubing, enhanced aluminium fins
• Immersion tested at 500 lb/sq-in, then nitrogen-pressurized and sealed
• Externally mounted flowrater body or internally mounted factory-installed TXV
• Schrader valve on liquid line for hiss-testing
• Refrigerant lines exit from the top of the coil
• Split access doors on top of the coil for easy service
• Plastic drain pans (primary and secondary)
• Built-in auxiliary drain pan with 3/4 in FPT
• Plenum sides and end constructed of foil-backed faced fiberglass duct board, plenum top and bottom constructed of galvanized steel
• Patented design
• 2nd generation
• Coil descriptor code (face area, rows, fins/in)
• Non-bleed air conditioner or heat pump R-410 TXV metering device
• 17-1/2 in W furnace
• Refrigerant out the top, plumbing out opposite sides

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Aspen_CR36A34_175T_000_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Aspen_CR36A34_175T_000_Specification_Sheet.pdf