fantech® Centrifugal In-Line Fan, Series: FG, 0.18 A, 120 VAC, 60 Hz, 1 -Phase, 20.4 W, 2886 rev/min Speed, 1 -Speed, 139 cu-ft/min, 4 in Duct, 8-1/2 in Dia Housing, 4 in Inlet, 4 in Dia Outlet, Class B Motor, Steel, Galvanized, 140 deg F, 8-1/2 in H
Frequency Rating
|
:
|
60 Hz
|
Phase
|
:
|
1 ph
|
Power Rating
|
:
|
20.4 W
|
Speed Rating
|
:
|
2886 rpm
|
Number of Speeds
|
:
|
1
|
Flow Rate
|
:
|
139 cfm
|
Housing Diameter
|
:
|
8-1/2 in
|
Inlet Size
|
:
|
4 in
|
Outlet Size
|
:
|
4 in Dia
|
Motor Type
|
:
|
Class B
|
Material
|
:
|
Steel
|
Finish
|
:
|
Galvanized
|
Dimensions
|
:
|
8-1/2 in H
|
- FG Series features new longer duct connections for easier installation
- Straight-through airflow allows fans to be installed at any angle at any point along the ductwork
- Performance, efficiency, reliability, air tightness, ease of installation
- Powered by ebm-PAPST external rotor motorized impeller for excellent heat dissipation, even at low rpm
- Permanently lubricated sealed ball bearings for maintenance-free operation
- Automatic reset thermal overload protection
- 100% speed controllable
- External rotor enclosure
- Fan shall be supplied with externally-mounted electrical terminal box with pre-wired terminal strip connections, capacitor shall be located within electric terminal box
- Motorized impeller shall be an external rotor type, class B insulation, enclosed with permanent split capacitor, motor shall be a permanently sealed self-lubricating ball bearing type
- Motor shall be acceptable for continuous-duty
- Fan wheel shall be of the backward inclined centrifugal type with a well designed inlet venturi for maximum performance
- Motorized impeller shall be both statically and dynamically balanced as one integral unit to provide for vibration free performance
- Includes-mounting bracket
- Can be installed in any position and outdoors
- Maintenance-free and reliable
- Mounting bracket and hardware included
- 5-years factory warranty