piwik image

Geary Pacific Supply

MENU

Shop

    What We Do

    Resources

    Events

      Company

      Locations

        My Account

        Geary Pacific Supply

        fantech® 40402
        Send Print
        1. pin-int
        fantech® 40402

        fantech® FG Series 40402 Centrifugal In-Line Fan, 120 VAC, 0.18 A, 20.4 W, 2

        fantech® 40402

        fantech® Centrifugal In-Line Fan, Series: FG Series, 0.18 A, 120 VAC, 60 Hz, 1 ph Phase, 20.4 W, 2886 rpm, 1 Speed, 139 cfm Flow Rate, 4 in Duct, 8-1/2 in Housing Diameter, 4 in Inlet, 4 in Dia Outlet, Class B Motor, 140 deg F, Steel, Finish: Galvanized, 8-1/2 in H

        Series      :      FG Series
        Amperage Rating      :      0.18 A
        Voltage Rating      :      120 VAC
        Frequency Rating      :      60 Hz
        Phase      :      1 ph
        Power Rating      :      20.4 W
        Speed Rating      :      2886 rpm
        Number of Speeds      :      1
        Flow Rate      :      139 cfm
        Duct Size      :      4 in
        Housing Diameter      :      8-1/2 in
        Inlet Size      :      4 in
        Outlet Size      :      4 in Dia
        Motor Type      :      Class B
        Temperature Rating      :      140 deg F
        Material      :      Steel
        Finish      :      Galvanized
        Dimensions      :      8-1/2 in H
        • FG Series features new longer duct connections for easier installation
        • Straight through airflow allows fans to be installed at any angle at any point along the ductwork
        • Performance, efficiency, reliability, air tightness, ease of installation
        • Powered by ebm-PAPST external rotor motorized impeller for excellent heat dissipation, even at low rpm
        • Permanently lubricated sealed ball bearings for maintenance-free operation
        • Automatic reset thermal overload protection
        • 100% speed controllable
        • External rotor enclosure
        • Fan shall be supplied with externally-mounted electrical terminal box with pre-wired terminal strip connections, capacitor shall be located within electric terminal box
        • Motorized impeller shall be an external rotor type, class B insulation, enclosed with permanent split capacitor, motor shall be a permanently sealed self-lubricating ball bearing type
        • Motor shall be acceptable for continuous-duty
        • Fan wheel shall be of the backward inclined centrifugal-type with a well designed inlet venturi for maximum performance
        • Motorized impeller shall be both statically and dynamically balanced as one integral unit to provide for vibration-free performance