Insulation hangers are 12 ga steel insulation pins that are permanently staked through 2 x 2 in galvanized steel base plates. A pressure sensitive adhesive backing provides a permanent bond between the insulation hanger and ductwork. Each case includes self locking companion clips. Insulation Hangers also have 2 clearance holes in the baseplate that allow further reinforcement with a #8 self-tapping screw when needed. They can be used to hold all low and medium density insulation and insulation board where the temperature will not exceed 150 deg F.

CARLISLE® Insulation Hanger, 2 x 2 in Size, 1-1/4 in Length, 12 ga Height, 12 ga Gauge, Steel, Hot Dipped Galvanized

• Reinforced baseplate
• Low carbon steel 12 ga pin allows easier bending of pin
• Paper backing easy to remove
• Includes self-locking companion clips
• Clearance holes allow adding #8 self-tapping screw for additional support
• Sharp diamond point to easily pierce through most insulation substrates

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/CARLISLE_308155_Specification_Sheet.pdf