MAGNA1 circulator pump with easy selection of pump setting The pump is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only 2 gaskets for sealing. The bearings are lubricated by the pumped liquid. In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. A pump with no maintenance requirements and extremely low life cycle cost. The MAGNA1 circulator pumps are designed for circulating liquids in heating systems with variable flows where it is desirable to optimise the setting of the pump duty point, thus reducing energy costs. The pumps are also suitable for domestic hot-water systems. To ensure correct operation, it is important that the sizing range of the system falls within the duty range of the pump.
Grundfos Circulator Pump, Series: MAGNA 1, MAGNA1 32-100 F Model, 115 to 230 V, 0.28 to 1.61 A, 60 Hz, 1/6 hp, 8.62 to 178 W, 50 gpm at 0 ft, 40 gpm at 10 ft, 1, 100 mm Dia Suction Size, 100 mm Dia Discharge, GF15/26/40/43, Flanged, 4 Pole, 175 psi Working, 32.81 ft Maximum Head, 30% Glass-Filled PES Impeller, Cast Iron Body, 104 deg F Ambient, 230 deg F Liquid, 201 mm W x 168 mm H
Series | : | MAGNA 1 |
Model | : | MAGNA1 32-100 F |
Voltage Rating | : | 115 to 230 V |
Amperage Rating | : | 0.28 to 1.61 A |
Frequency Rating | : | 60 Hz |
Hp Rating | : | 1/6 hp |
Power Rating | : | 8.62 to 178 W |
Flow Rate | : | 50 gpm at 0 ft, 40 gpm at 10 ft |
Phase | : | 1 |
Suction Size | : | 100 mm Dia |
Discharge Size | : | 100 mm Dia |
Connection size | : | GF15/26/40/43 |
Connection Type | : | Flanged |
Number of Poles | : | 4 |
Pressure Rating | : | 175 psi Working |
Maximum Head | : | 32.81 ft |
Impeller Material | : | 30% Glass-Filled PES |
Body Material | : | Cast Iron |
Temperature Rating | : | 104 deg F Ambient, 230 deg F Liquid |
Dimensions | : | 201 mm W x 168 mm H |