piwik image

Geary Pacific Supply

MENU

Shop

    What We Do

    Resources

    Events

      Company

      Locations

        My Account

        Geary Pacific Supply

        Aspen LGM24B4-000
        Send Print
        1. pin-int
        Aspen LGM24B4-000

        Aspen LGM24B LGM24B4-000 Air Handler, 18000 to 24000 Btu/hr BTU, 1030 cfm, 120 V

        Aspen LGM24B4-000

        Aspen Air Handler, Series: LGM Series, Model: LGM24B, 24 ton Nominal Capacity, 18000 to 24000 Btu/hr Cooling, 18000 to 24000 Btu/hr, 120 V, 4.8 A, 1/3 hp Rating, 1030 cfm Rating, Horizontal Configuration, R-410, 15 A Fuse, 12 x 20 in Filter, 2 Stage, ECM Motor, 1 in-WG, Rail Mount, Steel, Galvanized, 40 in H x 14-1/2 in W x 21-1/2 in D, Additional Information: High Efficiency, Aluminum Coil

        Series      :      LGM Series
        Model      :      LGM24B
        BTU Rating      :      18000 to 24000 Btu/hr
        Cooling Capacity      :      18000 to 24000 Btu/hr
        Nominal Capacity      :      24 ton
        HP Rating      :      1/3 hp
        CFM Rating      :      1030 cfm
        Voltage Rating      :      120 V
        Amperage Rating      :      4.8 A
        Configuration      :      Horizontal
        Number of Stages      :      2
        Refrigerant Type      :      R-410
        Mounting Type      :      Rail
        Fuse Rating      :      15 A
        Motor Type      :      ECM
        Pressure Rating      :      1 in-WG
        Material      :      Steel
        Finish      :      Galvanized
        Dimensions      :      40 in H x 14-1/2 in W x 21-1/2 in D
        Additional Information      :      High Efficiency, Aluminum Coil
        • APPLICATION VERSATILITY - Upflow or horizontal right as shipped (field convertible for downflow or horizontal left applications). Can be AHRI certified with most brands of air conditioners or heat pumps. ETL-listed for use with all major refrigerants when proper metering device is used.
        • LOW LEAKAGE CABINET - Less than 2% air leakage from cabinet when tested in accordance with ASHRAE standard 193. Unit must be installed according to installation instructions. Sturdy, fully insulated galvanized steel cabinet with knockout for duct return.
        • AIR MOVING SYSTEM - Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque. Motors are pre-programmed with speeds and torques at the factory for optimal performance and reliability. Direct drive blowers circulate air quietly and efficiently. Rail mounted blowers provide easy removal for service and maintenance.
        • ELECTRONIC CONTROL BOARD - An electronic board controls the functioning of the system, reducing moving parts. The board provides a blower time delay to maximize heat/cool extraction and offers an integrated fuse for additional protection.
        • ALL ALUMINUM COIL - High efficiency rifled aluminum tubes and enhanced aluminum fins provide maximum heat transfer. All coils factory leak tested with two-stage pressure decay and mass spectrometer process, then nitrogen pressurized, and factory-sealed for maximum reliability. Available with either factory-installed orifice or TXV metering device. Field-installable bolt-on TXVs are also available. Access door allows for easy coil cleaning.