- Call Us 800-44-geary
-
Locations
My Favorites
DAIKIN DFH0904D000001S
DAIKIN packaged rooftop units (RTUs) are built to perform, with features and options that help provide low installation and operation costs, superior indoor air quality, efficient operation and longevity.
DAIKIN Packaged Heat Pump, DFH Series, 7-1/2 ton Nominal Capacity, 86000 Btu/hr Cooling, 460 V, 21.9 A, 2.4 hp, 60 Hz, 3 ph Phase, 300 to 1600 rpm Rotational Speed, Scroll Compressor, 3000 cfm, 14.1 IEER, 11 EER Rating, NPT Connection, 3/4 in Connection, R-410A Refrigerant, 1 Stages, 25 A Fuse Rating, Direct Drive, 16 FPI Fins per Inch, 20 x 25 x 2 in, 25 x 25 x 2 in Filter, Steel, Finish: Galvanized/Powder-Painted, 93-3/4 in L x 60-3/8 in W x 54-5/8 in H
| Series | : | DFH Series |
| Cooling BTU Rating | : | 86000 Btu/hr |
| Nominal Capacity | : | 7-1/2 ton |
| Voltage Rating | : | 460 V |
| Amperage Rating | : | 21.9 A |
| Refrigerant Type | : | R-410A |
| HP Rating | : | 2.4 hp |
| Rotational Speed | : | 300 to 1600 rpm |
| Frequency Rating | : | 60 Hz |
| Phase | : | 3 ph |
| Compressor Type | : | Scroll |
| CFM Rating | : | 3000 cfm |
| EER Rating | : | 11 |
| Number of Stages | : | 1 |
| Drive Type | : | Direct |
| Connection Type | : | NPT |
| Fuse Rating | : | 25 A |
| Fins per Inch | : | 16 FPI |
| Material | : | Steel |
| Finish | : | Galvanized/Powder-Painted |
| Dimensions | : | 93-3/4 in L x 60-3/8 in W x 54-5/8 in H |
- DAIKIN packaged rooftop units are made with high quality galvanized steel with a powder-paint finish to provide higher corrosion resistance
- High performance, low noise scroll compressors to match the required total load
- The direct drive with airfoil single width, single inlet (SWSI) class II construction supply fan with aluminum fan + blades provides efficient and quiet operation at wide ranging static pressure and air flow requirements
- The indoor coil section is installed in a draw through configuration to provide better dehumidification
- Packaged rooftop units come equipped with a well organized, large, easy-to-use weather-proof internal control box with easy access, for a better user experience
- Unit provides a draw through filter section as standard for better air quality and long-lasting component maintenance
- Wide ranging of electric heat selections effectively handle most comfort heating demand from morning warm-up control to full heat
- ETL listed electric heat is factory assembled, installed and tested
- Units are completely wired and tested at the factory to provide faster commissioning and start-up
Warranty Information
Video Link
