- Call Us 800-44-geary
-
Locations
My Favorites
The SLD Series is a solid core clean-up filter-drier for use in the suction line for both refrigeration and air conditioning systems. The compact design incorporates a large outside diameter shell, which results in a shorter lay-in length, and a larger core, which provides a greater filtration area for maximum operating efficiency. The core material has controlled porosity which effectively removes and holds a maximum amount of contaminants with a minimal pressure drop. In addition, the core material collects and holds acids and other harmful contaminants present after a motor burnout. Access valves make it easy to measure pressure accurately. The SLD-8 and SLD-27 each have one access fitting. The SLD-13 and SLD-15 each have two access fittings. Occasionally, enough contaminant matter may collect in the filter core to cause a slight pressure drop.
Parker® Gold Label™ Suction Line Filter Drier, SLD Series, Model: SLD 8-6SV-HH, 3/4 in, Solder Connection, 355 psig, R-134A, R-22/407, R-404A/507, R-410A Refrigerant, 5 ton Flow, 5.98 in L, Additional Information: Premium, 8 cu-in Desiccant, 21 sq-in Filter Area, 4.6 in System Cutout Length, 2.69 in Dia Shell
| Series | : | SLD Series |
| Model | : | SLD 8-6SV-HH |
| Size | : | 3/4 in |
| Connection Type | : | Solder |
| Pressure Rating | : | 355 psig |
| Refrigerant Type | : | R-134A, R-22/407, R-404A/507, R-410A |
| Flow Capacity | : | 5 ton |
| Dimensions | : | 5.98 in L |
| Additional Information | : | Premium, 8 cu-in Desiccant, 21 sq-in Filter Area, 4.6 in System Cutout Length, 2.69 in Dia Shell |
- Made in the USA
- Molded porous core
- High acid capacity
- Low pressure drop - exceptionally high flow rates
- Designed for system clean-up
- 500 hours salt spray protection
- Short system cut-out lengths allow installation in tight areas
- Access valves simplify pressure drop measurement
- ODF Solder fittings
- 355 psig (24.5 bar) MRP
- UL Listed under SMGT/SMGT7-SA1756
Catalog
