- Call Us 800-44-geary
-
Locations
My Favorites
Design Polymerics 2501-01-05
A premium grade, water based, UL classified duct liner adhesive specifically formulated for spray, brush, roller and coil line applications. It can be used to seal cut edges of fiberglass duct liner. DP 2501 can also be used to bond duct wrap to galvanized duct and for bonding FSK to fiberglass and urethane pipe insulation.
Design Polymerics Water-Based Duct Liner Adhesive, 5 gal Net Content, Pail Container, Liquid Form, White, Mild Sweet Odor/Scent, Up to 400 sq-ft Coverage Area, 8 to 9.5 pH, 1.1 to 1.2 Specific Gravity, 212 deg F Boiling Point, 22 g/L VOC, 2000 to 3000 cPs Viscosity, 1 year Shelf Life, 40 to 110 deg F
| Net Content | : | 5 gal |
| Container Type | : | Pail |
| Form | : | Liquid |
| Color | : | White |
| Odor/Scent | : | Mild Sweet |
| Coverage Area | : | Up to 400 sq-ft |
| pH Range | : | 8 to 9.5 |
| Specific Gravity | : | 1.1 to 1.2 |
| Boiling Point | : | 212 deg F |
| VOC Content | : | 22 g/L |
| Viscosity | : | 2000 to 3000 cPs |
| Temperature Rating | : | 40 to 110 deg F |
| Shelf Life | : | 1 year |
- Excellent wet tack
- Non-flammable
- Moisture resistant
- Exceptional coverage
- Low odor
- Non-oxidizing
- Bonding fibrous duct wrap and duct liner insulation to galvanized duct work
- Sealing cut edges of fiberglass insulation
- Bonding kraft backed foil coverings to fiberglass and urethane flat stock or pipe insulation
- Bonding multiple layers of fibrous insulation board
- Clean Up use warm water and soap
- Open time 10 to 20 min depending on humidity, temperature, and application rate
- Non-flammable wet or dry
- Freeze/thaw stability - do not allow to freeze
- Flash point - no flash to boiling
- Chemical family - synthetic latex
- Solids content - 40 +/- 2%
SDS
