Bard® Quiet Climate Package Heat Pump, Series: T, T60S1-B Model, 5 ton Nominal, 56000 Btu/hr Cooling Cooling BTU Rating, 34600 Btu/hr Low Heating, 52000 Btu/hr High Heating Heating BTU Rating, 230/208 VAC, 32 A, 1/2 hp Fan Motor, 3/4 hp Blower Motor, 60 Hz, 3 -Phase, 1025 rev/min Fan Motor, Scroll Compressor, 3700 cu-ft/min Fan Motor, 1650 cu-ft/min Cooling Blower Motor, 10.7 EER, R-410A Refrigerant, 2 -Stage, 45 A Fuse, Wall Mounting, 20 x 30 x 1 in Filter, 20 ga Steel, Galvanized, Zinc-Coated, Buckeye Gray, 42.075 in W x 93 in H x 22.432 in D
Series
:
T
Model
:
T60S1-B
Cooling BTU Rating
:
56000 Btu/hr Cooling
Heating BTU Rating
:
34600 Btu/hr Low Heating, 52000 Btu/hr High Heating
Nominal Capacity
:
5 ton
Voltage Rating
:
230/208 VAC
Amperage Rating
:
32 A
Refrigerant Type
:
R-410A
Mounting Type
:
Wall
HP Rating
:
1/2 hp Fan Motor, 3/4 hp Blower Motor
Rotational Speed
:
1025 rev/min Fan Motor
Frequency Rating
:
60 Hz
Phase
:
3
Compressor Type
:
Scroll
CFM Rating
:
3700 cu-ft/min Fan Motor, 1650 cu-ft/min Cooling Blower Motor
EER Rating
:
10.7
Number of Stages
:
2
Fuse Rating
:
45 A
Material
:
20 ga Steel
Finish
:
Galvanized, Zinc-Coated
Color
:
Buckeye Gray
Dimensions
:
42.075 in W x 93 in H x 22.432 in D
Revision code (1)
Economizer - standard - enthalpy ventilation (ECONWMS-E5B field installed part no), units controlled by thermostats other than Bard 8403-060 or Bard CompleteStat may require Bard "8620-220 two-stage heat pump with economizer" relay kit for proper operation
2 in pleated (MERV 6) filter
Front (standard) supply air outlet
Standard hydrophilic fin indoor coil and uncoated aluminum outdoor coil
Control modules: the high and low pressure controls are auto reset, the low ambient control includes an 8201-008 (fan relay) and permits cooling operation down to 0 deg F
13.1/14.2 A-rated load, 16.6 A branch circuit selection current, 110/110 A locked rotor compressor, 3.8 A fan motor and 4.9 A blower motor
One-speed fan and variable speed blower motor
Self-contained energy efficient heating and cooling system
Copper tube/aluminum fin coils - grooved copper tubing and enhanced aluminum fins provide maximum heat transfer and high energy efficiency
Twin blowers - move air quietly
Phase rotation monitor - standard on all three-phase scroll compressors
Foil faced insulation - standard on all units
Full length mounting brackets
Electrical components - are easily accessible for routine inspection and maintenance through a right side, service panel opening
Electric heat strips - features an automatic limit and thermal cut-off safety control
Filter service door - separate service door provides easy access for filter change
Condenser fan and motor shroud assembly slide out for easy access
Slope top - standard feature for water run-off
Top rain flashing - standard feature on all models