- Call Us 800-44-geary
-
Locations
My Favorites
TheZP3-HCMSrepresents the most contractor-friendly solution today for eliminating bypass. The ZP3-HCMS model is designed to fit up to three-zone applications for single-stage and multi-stage heat/cool systems in residential and light commercial applications. This zone control system comes with built-in ESP static pressure control module which eliminates the need for a bypass damper when used with the standard 3-wire MD Series dampers. The system works like any standard zone control system with one exception. As zone dampers open and close, the ESP module continuously monitors the system static pressure and if required, sends a signal to zone dampers that are in the closed position to open to a point where the proper static pressure level is maintained. The small amount of air that is allowed to bleed into non-calling zones eliminates air noise and assures proper airflow through the HVAC system preventing coil freeze-up.
iO HVAC Controls Heat/Cool Zone Control Panel Kit, 24 VAC, VA Rating: 40 VA, 3 Zones, Auto, 5 to 90 % Humidity Rating, 18 AWG Wire, Aluminum, -40 to 150 deg F, 6 in W x 1-1/2 in D x 8 in H
| Voltage Rating | : | 24 VAC |
| VA Rating | : | 40 VA |
| Number of Zones | : | 3 |
| Changeover | : | Auto |
| Humidity Rating | : | 5 to 90 % |
| Wire Size | : | 18 AWG |
| Material | : | Aluminum |
| Temperature Rating | : | -40 to 150 deg F |
| Dimensions | : | 6 in W x 1-1/2 in D x 8 in H |
- Built-in static pressure control eliminates the need for a bypass damper
- First call priority with time share
- LED status indication
- Independent fan control by zone
- Short cycle protection
- Competitively priced
- Three-wire iO dampers and static pressure sensor must be used
- Adjustable high limit
- Adjustable high and low balance point
Catalog
