piwik image

CLEAN COMFORT® VE70220

CLEAN COMFORT® VE Series VE70220 Energy Recovery Ventilator, 70 to 220 cfm A

CLEAN COMFORT® VE70220

The Clean Comfort® brand VE Series ERV exchanges heat between the fresh incoming air and stale exhaust air.

CLEAN COMFORT® Energy Recovery Ventilator, Series: VE Series, 70 to 220 cfm Air Flow Capacity, 1.5 A, 120 VAC, 60 Hz Frequency, 1 ph, 142 W Power, 3/32 hp, 127 sq-ft Coverage Area, Drain Connection, 6 in Duct, 48 Enthalpy Recovery Efficiency, 2695 rpm Fan, PSC Motor, 5 to 95 deg F Temperature Recovery Efficiency, 20 ga, Steel/Polystyrene, Galvanized/Pre-Painted, Duct Mounting, 29-1/2 in Length, 22-1/2 in Width, 16-1/2 in Height

Series      :      VE Series
Air Flow Capacity      :      70 to 220 cfm
Amperage Rating      :      1.5 A
Voltage Rating      :      120 VAC
Frequency Rating      :      60 Hz
Phase      :      1
Power Rating      :      142 W
HP Rating      :      3/32 hp
Coverage Area      :      127 sq-ft
Connection Type      :      Drain
Duct Size      :      6 in
Enthalpy Recovery Efficiency      :      48
Fan Speed      :      2695 rpm
Motor Type      :      PSC
Temperature Recovery Efficiency      :      5 to 95 deg F
Gauge      :      20 ga
Material      :      Steel/Polystyrene
Finish      :      Galvanized/Pre-Painted
Mounting Type      :      Duct
Length      :      29-1/2 in
Width      :      22-1/2 in
Height      :      16-1/2 in
  • Three operating modes (intermittent/continuous/high)
  • 100% variable speed
  • ISF™ (insert, slide and fix) 5 in oval collar system
  • Advanced proportional supply fan shutdown defrost sequence
  • Single person mounting system via wall bracket
  • Dual permanently lubricated PSC motors
  • Integrated auxiliary furnace interlock relay
  • Ventilator can be balanced by adjusting each motor independently, no balancing dampers required
  • Connection terminals for optional wall controls
  • Integrated balancing pressure taps
  • Quiet operation