- Call Us 800-44-geary
-
Locations
My Favorites
fantech® 40406
fantech® Centrifugal In-Line Fan, 0.58 A, 120 V, 60 Hz, 72 W, 2480 rpm, 1 Speed, 305 cfm Flow Rate, 6 in Duct, 13-3/8 in Housing Diameter, 6 in Inlet, 6 in Dia Outlet, 1 in W Flange, Ball Bearing, 140 deg F, G90 Steel, Galvanized, 9 in L
| Amperage Rating | : | 0.58 A |
| Voltage Rating | : | 120 V |
| Frequency Rating | : | 60 Hz |
| Power Rating | : | 72 W |
| Speed Rating | : | 2480 rpm |
| Number of Speeds | : | 1 |
| Flow Rate | : | 305 cfm |
| Duct Size | : | 6 in |
| Housing Diameter | : | 13-3/8 in |
| Inlet Size | : | 6 in |
| Outlet Size | : | 6 in Dia |
| Flange Size | : | 1 in W |
| Bearing Type | : | Ball |
| Temperature Rating | : | 140 deg F |
| Material | : | G90 Steel |
| Finish | : | Galvanized |
| Dimensions | : | 9 in L |
- FG series features new longer duct connections for easier installation
- Straight-through airflow allows fans to be installed at any angle at any point along the ductwork
- Performance, efficiency, reliability, air tightness, ease of installation
- Powered by ebm-PAPST external rotor motorized impeller for excellent heat dissipation, even at low rpm
- Permanently lubricated sealed ball bearings for maintenance-free operation
- Automatic reset thermal overload protection
- 100% speed controllable
- External rotor enclosure
- Fan shall be supplied with externally-mounted electrical terminal box with pre-wired terminal strip connections, capacitor shall be located within electric terminal box
- Motorized impeller shall be an external rotor type, class B insulation, enclosed with permanent split capacitor, motor shall be a permanently sealed self-lubricating ball bearing type
- Motor shall be acceptable for continuous-duty
- Fan wheel shall be of the backward inclined centrifugal-type with a well designed inlet venturi for maximum performance
- Motorized impeller shall be both statically and dynamically balanced as one integral unit to provide for vibration-free performance
Catalog
