- Call Us 800-44-geary
-
Locations
My Favorites
The RDP series are galvanized steel, single blade dampers compete with a 12 VDC motor actuator. These dampers are shipped complete and ready for installation. The RDP can be installed in any position in any properly sized duct. All RDP dampers are rated for duct systems less than 2 in-WC.
Zonefirst® Zone Damper, RDP Series, Single Blade, 2 in-WC Differential Pressure, RJ11 Modular Connector Electrical Connection, 5 to 95% Non-Condensing Humidity Rating, 5 s Powered Open/Closed Timing Range, 7 in-lb Torque, 24 ga Gauge, Steel, Galvanized, Inline Mounting, Power Open, Power Closed Motor, Motor Specifications: 12 VDC, 0.1 A, Round Shape, 0 to 150 deg F Operating, -13 F to 175 deg F Storage, 9-3/4 in Length
| Series | : | RDP Series |
| Blade Type | : | Single |
| Differential Pressure | : | 2 in-WC |
| Electrical Connection | : | RJ11 Modular Connector |
| Humidity Rating | : | 5 to 95% Non-Condensing |
| Timing Range | : | 5 s Powered Open/Closed |
| Torque Rating | : | 7 in-lb |
| Gauge | : | 24 ga |
| Material | : | Steel |
| Finish | : | Galvanized |
| Mounting Type | : | Inline |
| Motor Type | : | Power Open, Power Closed |
| Motor Specifications | : | 12 VDC, 0.1 A |
| Shape | : | Round |
| Temperature Rating | : | 0 to 150 deg F Operating, -13 F to 175 deg F Storage |
| Length | : | 9-3/4 in |
- The MP12M motor has been tested to over 1000000 cycles to provide long life
- A 12 VDC damper motor, model MP12M, powers the RDP
- The RDP motor also has a two color LED to indicate the damper position
- Direct drive linkage
- Daisy chain upto 10 dampers on each zone
- 25 ft modular cord included with each damper
Specification Sheet
