- Call Us 800-44-geary
-
Locations
My Favorites
iO HVAC Controls D-12
The "D" Series dampers are galvanized steel, single blade dampers complete with a 24 V, spring return actuator. These dampers are shipped complete and ready for installation. The "D" Series damper can be installed in any position in any properly sized duct. They are rated for duct systems less than 1 in-WC.
iO HVAC Controls Zoning Damper, D Series, 12 in Diameter, 24 V, VA Rating: 2.5 VA, 1 Blade, 1 in-WC Pressure Drop, 22 ga Gauge, Steel, Synchronous Motor, Motor Specifications: 24 V
| Series | : | D Series |
| Diameter | : | 12 in |
| Voltage Rating | : | 24 V |
| VA Rating | : | 2.5 VA |
| Number of Blades | : | 1 |
| Pressure Drop | : | 1 in-WC |
| Gauge | : | 22 ga |
| Material | : | Steel |
| Motor Type | : | Synchronous |
| Motor Specifications | : | 24 V |
- Compatible with most zone control panels
- Tight seal gasket
- Can be configured as PC/SO or PO/SC
- Quiet operation
- Simple adjustment for setting the minimum position
Specification Sheet
