piwik image

Zonefirst® RDP08

Zonefirst® RDP08 Zone Damper With MP12M Plug-In Motor, Round, 4.69 in-lb

Zonefirst® RDP08

The RDP series are galvanized steel, single blade dampers compete with a 12 VDC motor actuator. These dampers are shipped complete and ready for installation. The RDP can be installed in any position in any properly sized duct. All RDP dampers are rated for duct systems less than 2 in-WC.

Zonefirst® Zone Damper, RDP Series, Single Blade, RJ11 Modular Connector Electrical Connection, 5 to 95% Non-Condensing Humidity Rating, 5 sec Nominal Powered Open/Closed Timing Range, 4.69 in-lb Torque, Steel, Galvanized, Inline Mounting, Power Open, Power Closed Motor, Motor Specifications: 24 VDC, 0.07 A, Round Shape, 2 in-WC Maximum, 0 to 150 deg F Operating, -20 to 175 deg F Storage, 9-3/4 in Length

Series      :      RDP Series
Blade Type      :      Single
Electrical Connection      :      RJ11 Modular Connector
Humidity Rating      :      5 to 95% Non-Condensing
Timing Range      :      5 sec Nominal Powered Open/Closed
Torque Rating      :      4.69 in-lb
Material      :      Steel
Finish      :      Galvanized
Mounting Type      :      Inline
Motor Type      :      Power Open, Power Closed
Motor Specifications      :      24 VDC, 0.07 A
Shape      :      Round
Pressure Rating      :      2 in-WC Maximum
Temperature Rating      :      0 to 150 deg F Operating, -20 to 175 deg F Storage
Length      :      9-3/4 in
  • The MP12M motor has been tested to over 1000000 cycles to provide long life
  • A 12 VDC damper motor, model MP12M, powers the RDP
  • The RDP motor also has a two color LED to indicate the damper position
  • Direct drive linkage
  • Daisy chain upto 10 dampers on each zone
  • 25 ft modular cord included with each damper