- Call Us 800-44-geary
-
Locations
My Favorites
A premium grade, water based, UL classified duct liner adhesive specifically formulated for spray, brush, roller and coil line applications. It can be used to seal cut edges of fiberglass duct liner. DP 2502 can also be used to bond duct wrap to galvanized duct and for bonding FSK to fiberglass and urethane pipe insulation.
Design Polymerics Duct Liner Adhesive, 1 gal Net Content, Pail Container, Composition: Proprietary Blend, Liquid Form, Black, Odor/Scent: Mild Sweet, Water Base, 400 sq-ft/gal Coverage Area, 8 to 9.5 pH, 1.1 to 1.3 Specific Gravity, 212 deg F Boiling Point, 32 deg F Freezing Point, 6 g/L VOC, 2500 to 3500 cPs Viscosity, Applicable Materials: Fiberglass, 1 year Shelf Life, 40 to 110 deg F
| Net Content | : | 1 gal |
| Container Type | : | Pail |
| Composition | : | Proprietary Blend |
| Form | : | Liquid |
| Color | : | Black |
| Odor/Scent | : | Mild Sweet |
| Coverage Area | : | 400 sq-ft/gal |
| pH Range | : | 8 to 9.5 pH |
| Specific Gravity | : | 1.1 to 1.3 |
| Boiling Point | : | 212 deg F |
| Freezing Point | : | 32 deg F |
| VOC Content | : | 6 g/L |
| Viscosity | : | 2500 to 3500 cPs |
| Applicable Materials | : | Fiberglass |
| Temperature Rating | : | 40 to 110 deg F |
| Base Type | : | Water |
| Shelf Life | : | 1 year |
- Excellent wet tack
- Non-flammable
- Moisture resistant
- Exceptional coverage
- Low odor
- Non-oxidizing
- Bonding fibrous duct wrap and duct liner insulation to galvanized duct work
- Sealing cut edges of fiberglass insulation
- Bonding kraft backed foil coverings to fiberglass and urethane flat stock or pipe insulation
- Bonding multiple layers of fibrous insulation board
- Clean Up use warm water and soap
- Open time 10 to 20 min depending on humidity, temperature, and application rate
- Flash point - no flash to boiling
- Non-flammable wet or dry
- Freeze/thaw stability - do not allow to freeze
- Chemical family - synthetic latex
- Solids content - 40 +/- 2%
SDS
