Air and dirt separators are used to continuously remove the air and debris contained in the hydronic circuits of heating and cooling systems. The air discharge of these devices is very high. They are capable of automatically removing all of the air present in the system down to the micro-bubble level. The discaldirt air and dirt separator also separates any solid impurities in the system. The impurities collect at the bottom of the device and can be removed through the drain pipe for the steel versions, to which a separately sourced drain valve can be mounted or drain shut-off cock for the brass version. The circulation of fully de-aerated and cleaned water enables the equipment to operate under optimum conditions, free from noise, corrosion, localized or mechanical damage.
Caleffi DiscalDirt Air/Dirt Separator, 546 Series, 1-1/4 in Nominal, Sweat Connection, 150 psi, 32 to 250 deg F, Glycol Solution, Water Suitable Media, 50 % Maximum Percentage of Glycol, 10 gpm Flow Rate, 5 um Particle Separation Capacity, Brass, 12-3/4 in H x 6-3/19 in W
| Series | : | 546 Series |
| Nominal Size | : | 1-1/4 in |
| Connection Type | : | Sweat |
| Pressure Rating | : | 150 psi |
| Temperature Rating | : | 32 to 250 deg F |
| Suitable Media | : | Glycol Solution, Water |
| Maximum Percentage of Glycol | : | 50 % |
| Flow Rate | : | 10 gpm |
| Particle Separation Capacity | : | 5 um |
| Material | : | Brass |
| Dimensions | : | 12-3/4 in H x 6-3/19 in W |