TWIN-FLO III heaters are for use with forced hot water residential heating systems and consist of a copper tube, aluminum finned heating element, with an electric motor and blower of unique cross flow design. Their purpose is to deliver a comfortable stream of warmed air, at or near floor level, and their construction is extremely compact so minimum space is required for installation.

Beacon Morris® Twin-Flo III Hydronic Kickspace Heater, 115 V, 0.5 A, 30.7 W, 1480 to 5240 Btu/hr, 1 to 3 gpm, 4 in H x 12-1/4 in W x 12-3/4 in D

• Kickspace heaters are the space-saving alternative to hot water baseboard
• The-type K heater is primarily used in horizontal floor installation, for example under a kitchen counter cabinet or bathroom sink enclosure
• They are ideal for radiant systems with the use of a low temperature aquastat designed to turn the unit on at 110 deg F
• Type W is for vertical mounting, fully recessed in the wall studs, with the air discharged upward through a flush mounted, louvered front panel
• Type F is a surface-mounted wall unit, with the air discharged evenly through a louvered front panel in an upward direction
• All-types have heating elements with 1/2 in nominal (5/8 in OD) copper tube connections and 115 V
• Electric blower motor, interwired with a 120 deg F reverse acting aquastat that prevents operation until hot water is circulating
• These units are not intended to be used on one or two pipe steam systems
• For gravity fed systems, it is recommended that a separate circulator pump be installed for the kickspace heater
• Designed to fit inconspicuously under a cabinet in the floor or in the wall
• Hot water from the home's boiler is circulated through the kickspace unit and the fan gently blows heated air into the room
• The homeowner simply selects the fan speed, then the unit turns on and off automatically according to heating demand
• 53 cu-ft/min high speed
• 3200 rev/min
• 0.034 hp motor

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Beacon_Morris_K_84_Specification_Sheet.pdf