Our silver frame filters are made from a 1-piece of roll-formed galvanized steel fastened together at one corner with a single rivet. This frame type is more cost-effective than the gold frame, but is not quite as strong and sturdy. Silver Frame rigid framed filters have 2 layers of polypropylene between 2 layers of expanded steel for improved air flow and rigidity. Our 2 in rigid framed filters are configured with the same construction as the 1 in electra silver, but with a 1.5 in white polyester ultra high loft impingement filtering center layer. This filter has the same ratings as its 1 in counterpart. We also have 1 and 2 in filter frames and disposable pads that consist of a roll formed metal frame with 1-layer of expanded metal support secured to one side. The filter material is tucked into the frame and is held by the fibers catching on the expanded metal support and the air flow. When soiled, it is easily removed for disposal and replaced by a clean piece of filter material pad. Our high arrestance, low resistance permanent filters, however, will give your commercial accounts an economic alternative to the disposable filter.
Air-Care™ Electra Silver Permanent Electrostatic Air Filter, Anti-Microbial Woven Polypropylene Media, Aluminum Frame, 15 in Width, 30 in Height, 5/8 in D, MERV: 6, 88 % Filter Efficiency, 300 fpm Rated Velocity, 0.085 in-WG Initial Resistance, 0.5 in-WG Final Resistance, 88% Peak Average Arrestance, 14-5/8 x 29-5/8 x 5/8 in Actual
Media Material | : | Anti-Microbial Woven Polypropylene |
Frame Material | : | Aluminum |
Initial Resistance | : | 0.085 in-WG |
Final Resistance | : | 0.5 in-WG |